Rocpadz Drum Sets.

Mount Clamp

1: Allen 102S Premium 2-Bike Trunk Mount Rack

Allen 102S Premium 2-Bike Trunk Mount Rack

Only one complaint, otherwise great

I am overall pleased with this trunk rack because it stayed secure and my bike didn't budge. I did use small bungees to secure my pedals and to keep the front wheel from turning during travel. The straps stayed secure for the entire 140 mile round trip. Once I tightened the straps, I did wrap the excess and tie a slip knot for extra insurance. The only complaint I have is that due to the sizes of the two bikes I was trying to carry, I couldn't figure out how to get a friend's bike into the second slot, even after trying various positioning options to get the bikes on. I believe the reason is that the 2nd bike was a woman's bike with a slanted top tube and it was a smaller frame so we had to put the one rack bike slot underneath the bottom tube (at the front of the bike) instead of underneath the top tube like it was intended. The bike was too small to just sit the top tube down into place like a bigger bike. The end result was because of only being able to get the small bike on the rack by doing the above, the handlebars or other bike parts kept the 2 from fitting on the rack so I ended up having to take the front wheel off the smaller woman's bike and put it in the trunk of the car. So, if you are hauling just one bike or two bikes that the handlebars don't interfere with getting them both on, the rack holds the bike in place very steady.

=====================================================================

GREAT BIKE RACK

I drove cross country from Richmond VA to San Diego California and I did not have one problem with this bike rack. When I was going through the desert and my constant speed was between 85-95 mph I decided to tie the bike straps to each other might sound confusing but you will figure it out and I did not have to tighten them for the rest of the ride. I have a 2004 Taurus and it fit perfectly and I am the worst with assembling things but it literally took me 5 minutes and I did it by myself. I only brought out one bike though so I can only comment on this using on bike but I fell in love with it and I use it all the time when I ride around CA. AWESOME RACK HIGHLY RECOMMENDED!!!

=====================================================================

Watch out for the result of cost reductions

I purchased the 102S model based on (i) the Company's reputation and (ii) the reviews from Amazon customers. This looked good when the product arrived, it was properly packaged and free from damage. This a very intuitive product and this is necessary as the instructions packed with the product are marginal at best. Things went well until I went to adjust the top strap - the lever on the clamp broke off with just the slightest pressure. This of course made any adjustment impossible.

Upon examination it was evident that the quality of the metal used in the clamp was not sufficient for the purpose intended. The quality of the metal reminded me of that used in some of the cheap products that were imported after WWII. This problem was apparently not unexpected as I saw that one other customer reported it and when I called Allen they treated it without any expression of surprise an in fact they sent me two of the clamps an indication that I should expect a repeat of this problem.

The rack itself shows evidence of good engineering and reasonable workmanship which is a credit to the founder Dick Allen. My contact at the company was Alex Allen would is apparently in charge and frankly was not impressive. I suspect that this product has, and continues to undergo a "cost reduction" analysis that has resulted in the inferior clamps that can break at any time. One has to wonder what will be next? When a product breaks "out of the box" and the replacement part is no better than the one that broke it does not instill confidence.

This was a good product at a fair price IF the quality of the parts are not diminished. I am concerned that the current product does not represent a good value as a result of what I see as a deterioration in quality - Buyer BewareAllen 102S Premium 2-Bike Trunk Mount Rack

=====================================================================

Awesome bike rack

I was looking around for my first ever bike rack and finally settled on this one because of the numerous solid reviews it recieved. Couldn't be happier with my choice! The rack is very sturdy and has plenty of room for two bikes. The points of contact between the bike frame and rack have thoughtfully covered by some black plastic tubes so no metal to metal rubbing. The thing that was worrying me most when i was thinking of purchasing this was the pedal of my bike rubbing against the trunk. However, the way the rack is designed actually keeps the pedal from coming close to the trunk. You just have to simply turn the inside pedal to the 12 o'clock position so that it rests against the bar.

The rack is perfect for normal shaped adult sized bikes but would be a bit problematic for smaller frame bikes such as kids bikes or womens bikes that have a slanted upper tube (there's a bar you can buy that'll easily solve this issue). So far the rack's tie downs on the car and on the bike are super sturdy and don't come loose or sway around during a drive and over speed bumps (i wasnt flying over those bumps of course). Best of all...the foamy parts of the rack that touch the car didn't scratch or dent my car. It could mostly be bcause I always follow the manufacturers advice and wipe down the area on the trunk where the foam touches.

A few more things:
-It may seem a bit obvious but since the rack literally takes seconds to install and remove I would highly recommend not leaving your bike(s) attached to the rack while you're away. Locks will be useless with this rack design.
-you will definitely need some rope/bungee cords/Velcro straps to tie down your front wheel to keep it from swinging and bouncing and ultimately damaging your car
-for those of you who would be concerned about this the rack makes it hard to see your rear license plate. Mine sits on my 2008 corolla with the bottom foam resting right on the lower third of my license plate.

====================================================================

Allen 102S Premium 2-Bike Trunk Mount Rack

Good quality product for the price. The rack quickly and easily attaches to the car. You will need a couple of bands to secure the front wheel and the bike to the rack so that it doesn't hit the car while driving. The rack is sturdy, and when attached properly, the bike is secure and moves very little while driving.

====================================================================

Everything I needed!

I needed a bike rack for one of my college courses. I looked up a few and this one seemed to have everything I needed. It fits my 2001 corolla perfectly. I tested it out the first day and it was perfectly sturdy. The fastest I drove with it and the bike attached was 80 mph and the spped didn't seem to effect it at all! I highly recommend if you are looking for a bike rack!

Read More About Allen 102S Premium 2-Bike Trunk Mount Rack

About the Author

Vehicle Equipment Comparison Shopping Online

DVD Movie

Camera Comparison

Cannon / Cannon Clamp Mount / 2207327 $65.06 Cannon - Cannon Clamp Mount - 2207327

Meinl Multi-Clamp - 4 Mount $62.99 Meinl Multi-Clamp - 4 Mount

TAB085 - web tablet clamp mount $32.99 Arkon TAB085 - Web tablet clamp mount

Cannon 2207327 Clamp Mount $67.95 "Cannon Clamp Mount Brand New Includes One Year Warranty, Product # 2207327 The Cannon 2207327 is a clamp mount that secures downrigger to the gunwale or transom. This works with Lake-Troll, Sport-Troll, Easi-Troll and Mini-Mag downriggers. It is built with machined aluminum and powder coated to resist corrosion and has a clamp opening 2"". 2207327 Features: Clamp Mount, Maximum Clamp Opening is 2 Inches, Built w/Machined Aluminum, Powder Coated to Resist Corrosion"

U Clamp Mount System $38.99 Cycra U Clamp Mount System Keep your handguard fresh and tight with a new U Clamp system CNC-Machined from billet aluminum for best fit and strength

ARKON Clamp Mount for Tablet PC $151.74 HEAVY DUTY TABLET C-CLAMP MOUNTACCSUNIVERSAL 22IN C-CLAMP BASE

Clamp Mount Footpegs $33.95 Drag Specialties Clamp Mount Footpegs For clamping pegs to frames or safety bars Includes chromed 1 in. and 1 1/4 in. steel clamps Sold in pairs

Gibraltar RS Adjustable End Mount Multi Clamp $39.99 Gibraltar RS Adjustable End Mount Multi Clamp

Gibraltar Rs Adjustable End Mount Multi Clamp $29.99 Gibraltar RS Adjustable End Mount Multi Clamp

Dynamic Column Clamp Mount K1C100B - mounting kit $260 Chief Dynamic Column Clamp Mount K1C100B - Mounting kit ( desk clamp mount ) for monitor - black

Dynamic Column Clamp Mount K1C200B - mounting kit $425 Chief Dynamic Column Clamp Mount K1C200B - Mounting kit ( desk clamp mount ) for 2 LCD displays - black

Coil Clamp by Joe's Racing Products $29.99 Rollbar mount with 1-3/4 in. clamp;Red

P-Clamp Mount $20.99 Kuryakyn P-Clamp Mounts One slick little clamp, our chrome plated stainless steel P-Clamp has many uses It works great for mounting Silver Bullets or other lights to frame tubes or engine guards Its hinged design makes installation easy Mounting is very secure because the clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory Sold each

Ram Mount / RAM Mount Universal Yoke Clamp / RAP-B-121BU $24.86 Ram Mount - RAM Mount Universal Yoke Clamp - RAP-B-121BU

Lansky Sharpeners Mount C Clamp Sharpener. Each $21.03 Manufacturer: Lansky Sharpeners. Each. Customers also search for: Discount Mount C Clamp Sharpener, Buy Mount C Clamp Sharpener, Wholesale Mount C Clamp Sharpener, 080999073001, ToolWeb, Miscellaneous Knives

Channel Master CM-3078 Clamp Mount $11.99 3078 Mounts in attic or on roof Universal wall mount allows you to install any masted antenna to any roof or in the attic Up to 1.5" Diameter Mast CM-3078 CM-3078 Clamp Mount Channel Master Clamp Mount PCT International, Inc www.pctinternational.com

Shimano Front Derailleur Clamp $15.99 Shimano Front Derailleur Clamp. Mount a braze-on front derailleur on your clamp-on frame.

Scotty 1071 Laketroller Clamp Mount Manual Downrigger $94.49 No. 1071 Clamp Mount Comes with fully portable anodized aluminum clamp for mounting on the gunnel or transom - 2 opening -. Great for aluminum boats and canoes

Contour Inner Clamp Handguard Mount $39.95 Contour Inner Clamp Handguard Mount from Moose Racing Exact replacement inner mounts for Moose aluminum handguards Securely mount handguards to handlebars Two-piece inner mount design allows easy installation without removing grips or controls Standard 7/8" bar steel/alum./alloy Made in the U.S.A.

Dynamic Desk Clamp Mount K1D100B - mounting kit $220 Chief Dynamic Desk Clamp Mount K1D100B - Mounting kit ( desk clamp mount single-screen mounting arm ) for LCD display - aluminum - black - mounting interface: 100 x 100 mm 7

Solid Mount Adjustable Top Clamp $156.99 The P-3 Upper triple clamp fits all 11/8" sized handlebars Offers up to five handlebar mounting positions for improved rider positioning: Forward 6,12,& 18mm or Back 6mm All clamps are CNC machined to precise specifications from the highest quality billet aluminum Bar mount risers included (most stock height risers are 35mm, Other riser options sold separately) Splayed bolt pattern on the handlebar mount clamp maximizes bar clamping strength **Closeouts are limited to stock on hand**

Lamplight Lamplight Deck Mount Clamp 1310144 $4.33 Deck mount clamp Universal For mounting torches on decks Metal mount is a flat black color Thumb screws are used to hold the torch in place and mount bracket to deck Brand #: Lamplight 1310144 UPC: 086861101445 Keywords: deck clamp torch mounting bracket mount

Clamp-on Light Mount Bracket by Garvin Industries for Jeep $24.99 Wilderness Expedition racks;Black powder coat;Sold individually Clamp-on Light Mount Bracket by Garvin Industries for Jeep